End of study dissertations
Proposed and directed by: Dr. Saad KHADAR
Ziane Achour Djelfa University
Faculty of Science and Technology
Department of Electrical Engineering
2nd Year Master
SK.001: Adaptive radial base function
technique neural network for fault tolerant control of double-star induction
machine.
SK.002: Real-Time digital emulation
for sensorless control scheme based on adaptive state Luenberger using RT-Lab
platform.
SK.003: Speed tracking
control of an open-end winding induction motor with state and load torque
estimation for an electric vehicle system.
SK.004: Fault-Tolerant
control based on sliding mode controller for DSIM under broken rotor bars
fault.
SK.005: Online parameter estimation of
five-phase induction motor based on model reference adaptive system.
SK.006: Optimized speed control via Backstepping using genetic algorithm of open-end stator winding induction motor
SK.007: A robust control algorithm for
a single stage PV source of permanent-magnet synchronous motor fey by Z-Source
converter.
SK.008: Dual direct torque control of
doubly fed induction machine using artificial neural network for wind energy
production.
SK.009: Field oriented
control of an open-end winding five phase induction motor supplied by dual
Boost NPC converter.
SK.010: Comparative study between
different control techniques applied to the double star machine
SK.011: Analysis and Synthesis of
non-linear control Techniques for Double star induction machine with flux and
speed estimation.
SK.012: Sensorless control technique
of open-end winding five phase induction motor under partial stator winding
short-circuit.
SK.013: Investigation on
SVM-Backstepping sensorless control of five-phase open-end winding induction
motor with Harmonics Elimination and Optimal Switching Sequence.
SK.014: A Simple, fast and robust
sensor-less control strategy of a symmetrical six-phase machine powered by
cascaded H-Bridge multilevel inverter.
SK.015: Sensorless control technique
of dual open-end winding induction machine based on non-linear adaptive
observer.
SK.016: Backstepping fault tolerant
control for open-end winding induction machine under first coil faults.
SK.017: Stator resistance compensator
based on sliding mode observer for direct torque scheme of multiphase induction
motor drives.
SK.018: Improved performance of
single-phase induction motor powered by voltage multicell inverter.
SK.019: Direct Torque Control of
series-connected five-phase two-motor drive.
SK.020: Robust sensorless control of induction
machine using parametric adaptation.
SK.021: Control strategy of induction
motor with fuzzy logic adaptation and minimization of total losses
SK.022: Multi-Machine Vector Modeling
for the Control of Polyphase Converter-Machine Sets
SK.023: Diagnostic des défauts dans les machines synchrones à
vitesse variable
SK.024: Application of
intelligent techniques to the control of a double star asynchronous machine
associated with a matrix converter
SK.025: DTC of induction motor based on "RNA"
using co-simulation on "FPGA"
SK.026: Fuzzy-Sliding Hybrid Control
of a Brushless DC Motor (BLDCM)
SK.027: Contribution to the control of
the electric machine, use of fuzzy logic, neural networks and genetic
algorithms
SK.028: Sliding mode control laws of
the stepper motor
SK.029: Scalar Control of Induction
Motor Using Arduino
SK.030: Improving electrical power
quality using a series multi-cell voltage inverter
SK.031: Numerical modeling of HT
insulators under 50Hz alternating voltage
SK.032: Direct predictive control of a
three-phase multi-cell converter for an active filtering application
SK.033: Modeling of 2D electromagnetic
phenomena of a deep-slot induction machine using FLUX2D software.
SK.034: Contribution à la CAO optimisée des machines
électriques, application au moteur linéaire à induction
SK.035: Risk management, analysis and
evaluation by integrated maintenance application “MOULINS EL HODNA M’SILA”
SK.036: Modeling the performance of a
hybrid renewable energy conversion installation
SK.037: Contribution to the
study, simulation and analysis of solar-assisted heat pumps
SK.038: Multilevel
converters in grid-connected PV systems
SK.039: Fault diagnosis in
photovoltaic systems using neural networks
SK.040: Improving the efficiency of a
wind turbine based on a MADA connected to the electrical grid
SK.041: Control of the
active and reactive powers of the MADA supplied by a three-level cascade for
the production of wind energy
SK.042: Study of a
double-feed drive for a variable-speed wind turbine: Application on a site in
TINDOUF
SK.043: Automation of a crushing
station
SK.044: Automation of a
production line by programmed technology "Brickworks Atlas of
BOU-SAADA"
SK.045: Nonlinear
predictive control of a cold-water production station
SK.046: Improving the
energy efficiency of centrifugal pumps
SK.047: Geothermal heat
pumps using phase change material thermal banks
SK.048: Automation of a
M’sila SP3 main pumping station
SK.049: Modeling and characterization
of electric double layer supercapacitors used in power electronics
SK.050: Contribution to the
study of electromagnetic phenomena in type 2 superconducting materials
Good luck